www.packagingconnections.com's team has published the 96 page power point guide on Aerosol Packaging. Its quite affordable and useful. It covers the following topics:
1. What is Aerosol
1.1 Aerosol Package
1.2 Aerosol
2 Aerosol Technology
3. Products
4. How Aerosol Container Looks
4.1 Types of Aerosol Containers
4.1.1 Glass Container
4.1.2 Metal Container
4.1.3 Mono Block
4.1.4 Two Piece Container
4.1.5 Three Piece Container
4.2 Manufacturing of Aluminium can
4.2.1 Manufacturing Process
4.2.2 Manufacturing of Tin Cans
4.2.3 Manufacturing Process
4.2.4 Comparison of Tin and Aluminium Cans
4.3 Why the Base of Aerosol Containers Are Curved
5. Aerosol Propellants
6. Aerosol Valves
6.1 Valve Components
6.2 Valve Types
6.2.1 Continuous Valve
6.2.2 Metered Valve
6.3 Aerosol Valves Discharge Rate
6.4 Some Innovations in the Valve
6.4.1 Truspray Valve
6.4.2 Working of Truspray Valve
6.5 Bag on Valve
6.5.1 Bag on Valve Machine
6.5.2 Container
6.5.3 Bag on Valve System
6.5.4 Pouch Formation
6.5.5 Two Bags in One Container
6.5.6 Benefits of Bag on Valve
7. Aerosol Filling
7.1 Cold Filling
7.1.1 Cold Filling Process
7.2 Pressure Filling
7.2.2 Pressure Filling Process
8. Safety Testing
9. Drying
10. Capping
11. Additional Accessory Equipment
12. Quality Control for Aerosols
13. Recycling For Aerosol Products
14. Label Information Required on an Aerosol Can
15. Benefits of Using Aerosol Products
16. Disadvantages of Aerosols
It has been developed by Mr Amninder Singh: Associate Research & Technology at www.packagingconnections.com You can buy this at our P-reports section.
Comments