imeditek 1300 medical packaging tester is designed to determine the puncture force of medical rubber closure, pullout force of rubber closure, break force of ampoule, sliding resistance of syringe, puncture force of syringe needle, connection force of syringe needle and needle hub, connection force of syringe needle hub and shield, seal performance of plastic blood bag, and the performance of other medical appliances. as well, imeditek 1300 could test the tensile strength, peeling force, heat seal strength, deformation, tearing force, adhesive performance, piercing force, opening force, low speed unwrapping force and pullout force etc. of plastic films, composite materials, flexible packaging materials, plastic soft tube, adhesives, adhesive tapes, protective films, combination caps, aluminum foils, diaphragms, back sheets, nonwoven fabrics, rubber, release paper and other products.a prepare test specimens according to specific standards. place the ampoule bottle on 2 vshaped supports according to relative standards and then apply force to the ampoule bottle.b select &ldquobreak force test of ampoule bottle&rdquo in test mode to create new test. then set up test parameters and specimen parameters.c click &ldquotest&rdquo button to start the test. the test curves will be displayed in real time when a single test is finished, the upper sample grips will return. when the upper sample grips return, the test results will be calculated automatically and it will return to the result interface. if necessary, mount next specimen and click &ldquotest&rdquo button. when all tests are finished, click &ldquogenerate result&rdquo.labthink instruments co., ltd.144 wuyingshan road, jinan, p.r.china 250031phone 8653185068566fax 8653185062108email trade.en@labthink.comlabthink international, inc.200 river&39s edge drive, medford, ma, 02155, usaphone 1 6178302190fax 1 7812193638email info@labthink.com 
