Idm39s Peel Testing Solutions Include A Motorised Test Stand Fitted With A 90deg Peel Fixture The Work Table Is A Movable Base And Accommodates A Range Of Sample Sizes Due To Mounting Holes This Work Table Moves Horizontally While The Test Crosshead Moves Vertically Maintaining The 90deg Angle Required Between The Table And The Direction Of Pullthis Equipment Is Designed To Be Used For Applications In The Packaging And Food And Beverage Industries Including Foil Seals Adhesives Films And Othersan Added Option To This Equipment Is The Implementation Of A Limit Switch Which Stops The Motorised Test Stand When The Slide Has Reached The End Of Travel This Would Prevent Breakage Due To Excessive Movementastm D6862 Standard Test Method For 90deg Angle Resistance Of Adhesives To Measure The Resistancetopeel Strength Of An Adhesive Bond Between One Rigid Adhered And One Flexible Adhered When Tested At An Angle Of Approximately 90deg Under Specified Conditions Of Preparation And Testingastm D6252peel Adhesion Of Pressuresensitive Label Stocks At A 90deg Angle Covers The Measurement Of Peel Adhesion Of Pressuresensitive Label Stocks The Test Measures Adherence To A Standard Steel Substrate Or Other Surfaces Of Interest For A Pressuresensitive Label Stock
