The Innovation Shown On This Tube Is The Capability To Combine The Benefits Of Two Printing Methods On One Side There Is Dry Offset Printing With The Benefits To Create Sharp Lettering To Realize Good And Homogenous Surfaces With Low Ink Cost Per Tube Dryoffset Ink Is 4 Times Less Expensive Than Inkjet Ink And The Possibility To Use Pantone Colours As Required For Brand Logos Shown On This Tube All Text Is Printed In Dryoffset And The Colours Of The Polytype And Pro6 Logos Are Made With Pantone Inks Simple Graphics On A Large Surface Like The Fire Pattern Are Also Made In Dryoffsetnbspon The Other Side There Is The Inkjet Printing With Its Own Benefits The Easy Realisation Of Colourful Photorealistic Prints Like The Ice Princess Shown On The Tube There Is Also The Possibility To Make Personalized Tubes Each One With A Different Designeven To Make Something Which Was Not Conceivable Until Today Now Becomes Possible Printing On Tubes And Closures In One Run And Thus Increasing The Product Marketing Surfacethe Combination Of These Two Printing Methods Brings Also A Benefit In Changeover Time Meaning That Difficult Sections Will Be Made In Digital Easy Sections In Dryoffsetthis Entire Decoration Was Created On The Rda 24165 Hybrid Machine From Polytype With Up To 6 Inkjet Printing Colours And Up To 8 Dryoffset Colours The Decoration Speed Of This Machine Is Typically 165 Tubesmin But Depends On Diameter And Printing Length Of Thenbspinkjet Designnbsp