Mondi and essity launch packaging for fe...
Mondi, a global leader in packaging and paper, has collaborated with Essity and Dow to create new, recyclable seconda
Mondi, a global leader in packaging and paper, has collaborated with Essity and Dow to create new, recyclable seconda
Mondi, a global leader in packaging and paper, has entered the bike packaging market with its Protector Bags, providi
Mondi, a global leader in packaging and paper, in partnership with Fiorini International, a world leading converter a
Mondi, a global leader in sustainable packaging and paper, has worked with FRESH!
However, it is difficult to differentiate between blister packaging and strip packaging. Besides, the difference between a strip pack and a blister pack you may find out from here.
Blister packaging |
Strip packaging |
Unit-dose packaging in which a semi-rigid blister/ cavity previously formed is filled with product and lidded with a heat-sealable backing material |
Unit dose packaging in which a pharmaceutical product is enclosed between two webs of heat-sealable flexible film |
Blister/ cavity/pocket is formed either a thermoforming or cold forming process |
Product is enclosed between two webs of heat-sealable flexible film through a heated reciprocating platen or a heated crimp roller. |
Blister packs are made through a form-fill-seal method |
Strip packs are formed around the tablet at a time when it is dropped to the sealing area |
Blister packs are usually produced at higher speeds than Strip. |
Strip packs are usually produced at lower speeds than the blister. |
Blister Packs have less possibility of wrinkling while sealing. |
The formed strip pockets are too tight, thus, wrinkling of the seal area or perforation of the pocket periphery may occur. |
Provide more mechanical protection |
Risk of product damage during handling /prone to mechanical damage. |
More air entrapped onto blister |
Less air entrapped, so provide more protection from air molecules and moisture. |
Less child resistance |
More child resistance |
Easy to use |
Strip pack is not usable by the elderly and patients with arthritic fingers. |
Blister packaging offers good display advantage. So, blister packaging helps customers to see pharmaceutical products, further aiding in their buying decision |
Strip packaging does not offer good display advantage |
Blister pack occupies less space |
Strip pack occupies more space |
A product is displaced from a Blister pack by pushing or peeling |
A product is displaced from a strip pack by tearing |
In Blister packaging, blister/cavities are formed either thermoformed or cold-formed process. |
In strip packaging, thermoformed or cold-formed cavities are absent. |
Two basic types of pharmaceutical blister packaging exist. • Thermoform blister packaging • Cold stretching blister packaging |
Strip packaging has no such type. |
Blister packs use as a primary pack for a range of pharmaceutical products such as tablet, pill, capsule, suppository, vial, and ampule |
Strip packaging is an alternative primary packaging system that used to pack especially capsule, also tablet |
When the company was founded in 1886, sterile packaging wasn't yet available—so delivering its surgical supplies and household hygiene products to hospitals and consumers required ingenuity and design smarts. Here's the story of the changing face of packaging at Johnson & Johnson.
As the 20th century progressed, so too did packaging innovations, including a wide variety of containers specifically designed to keep home health items hygienic. As a result, Johnson & Johnson’s products became not just better at keeping people healthy—but easier to use, too. (Tooth "cream" in a squeezable metal tube? It was a brilliant innovation in 1889!)
The company also made labels and packages more aesthetically appealing to consumers, updating the look of products to align with changing design styles and tastes.
Take a look at these 11 Johnson & Johnson products spanning the 1880s to 1950s and marvel at their old-school yet highly effective and innovative packaging.
1. 1886-1887: Tooth Cream in a Bottle :
Until the mid-1880s, people brushed their teeth using commercial “tooth powder:” You’d stick your toothbrush into a jar of powder shared with multiple family members (and all their germs). In 1886 to 1887, Johnson & Johnson's Zonweiss Tooth Cream (above) made its debut. It was packaged in a bottle with an applicator spoon that each family member could use individually, making brushing more sanitary. By 1889, the company came up with an even more hygienic way to package tooth cream: in squeezable metal tubes, similar to the toothpaste tubes we use today.
2. 1900s-1910s: Surgical Gauze Packed in Fruit Jars :
In 1886, Johnson & Johnson became the first manufacturer of mass-produced sterile surgical supplies. Ready-made sutures, absorbent cotton and gauze could prevent infection and save lives—but only if they were packaged in a way that would keep out germs. So the company turned to a familiar type of container: fruit jars, which could be sealed to keep the content sterile. The one above is from the 1900-1910s.
3.1900s: Easy-to-Cut Dental Floss :
In 1898, Johnson & Johnson was the first mass-market manufacturer of affordable dental floss (made from leftover suture silk). And in the early 1900s, the company's New Era Dental Floss hit store shelves in a glass container with a novel cutting mechanism on the lid.
4. 1905: Sutures Stored in Glass Tubes :
Another innovation to keep sutures sterile: thin glass tubes. Beginning in 1905, Johnson & Johnson employed nine on-site glassblowers to make handblown glass packaging for its surgical sutures.
5. 1910s: Pretty Tins for Adhesive Plaster :
Adhesive plaster is the old-school word for adhesive tape, which was used to keep surgical dressings in place. Often packed in first-aid kits, adhesive plaster was also sold individually in colorful decorative tins, like this one from the 1910s.
6.1923: Medicated Plasters Packed in Cigar Boxes:
Cigar boxes used to package more than just cigars. Johnson & Johnson sold Dr. Grosvenor's Bellcapsic Plaster (aka, adhesive patches infused with medicine that was absorbed through the skin) in these iconic boxes as well. This box, from 1923, is decorated with pink and blue floral motifs, adding a bit of beauty to the packaging of a product meant to alleviate topical pain.
7.1929: Art Deco Indigestion Relief :
This circa-1929 bottle of Papoids, a papaya-based indigestion remedy that Johnson & Johnson first put on the market in 1887, sported a blue-glass Art Deco look—a style that reflected the might and power of the 20th century machine age. Even better, the bottle was small enough to be tucked into a pocket or purse. That made it ideal for consumers who needed discreet indigestion relief on the go.
8. 1930s: BAND-AID® Brand Adhesive Bandages Stored in Iconic Tins :
When they first hit store shelves in 1921, BAND-AID Brand Adhesive Bandages came in cardboard boxes. But in 1926, Johnson & Johnson began selling them in flat, square tin containers. The tins became as popular as the bandages themselves and were typically repurposed to hold small household items like coins, nails or buttons. The tins changed style and shape over the decades (the tin in the photo above dates back to the 1930s), and many are now prized collector’s items. In 1994, the company switched back to cardboard boxes.
9. 1930s: A First-Aid Kit With Flair:
Another example of midcentury Art Deco design: this sleek and streamlined first-aid kit from the 1930s. It was a perfect pick for consumers who wanted a kit that fit the style of the era. Johnson & Johnson manufactured a variety of first-aid kits beginning in 1888 geared toward different situations, such as household use, for traveling and to stash in your car.
10.1950s-early 1960s: Baby Oil in Tapered Glass Bottles :
Packaged in cylindrical glass bottles with screw-cap tops when it debuted in 1935, Johnson’s Baby Oil the first shelf-stable baby oil and part of the company's baby care line of products that launched in 1894 was designed to gently moisturize delicate baby skin after a bath and during diaper changes. The glass bottle above, from the 1950s to early 1960s, sports a midcentury shape tapered in the center.
11.1958: Germ-Proof Cotton-Ball Dispensing:
Today, cotton balls are typically packed in sterile plastic bags. But in 1958, Johnson & Johnson pioneered “cosmetic cotton” cotton balls packaged in a tin dispenser with a plastic top. Consumers could “pick” one puff at a time, never touching the other cotton balls and potentially exposing them to germs.
Gentlebrand designs the “no-label” packaging for Montbest, the renowned product brand of the Korean company Korea Cry
Plastic container manufacturer Ring Container Technologies announced November 30 that Barrier Guard Oxygen Smart, a b
Albéa has just been granted recognition from the Association of Plastic Recyclers (APR) for its printed extruded tube
Asahi YOU. US, Ltd.
With over 500 billion PET bottles consumed globally every year, and many of those 500 billion turning up as waste in
Creative agency Hell Yeah!
The long-awaited proposal for the revised European regulation on packaging and packaging waste was published Nov.
A global ‘Packaging Design for Recycling Guide’ has been developed by ECR Community (Efficient Consumer Response – www.ecr-community.org), WPO (World Packaging Organisation – www.worldpackaging.org) and FH Campus University of Applied Sciences (www.fhcampuswien.ac.at), Austria, and is available for download.
Design for recycling is part of circular product design and represents an important basis for holistic sustainability assessment. Accordingly, circularity means that the packaging is designed in such a way PRESS RELEASE that the highest possible recycling of the materials in use can be achieved. The goals here are resource conservation, the longest possible service life, material-identical recycling (closed-loop recycling) or the use of renewable materials. Circular packaging should therefore be designed and manufactured in such a way that it can be reused (reusable solution) and/or that the raw materials used can be reused to a large extent as secondary raw materials after the use phase (recycling) and/or consist of renewable raw materials.
Avery Dennison’s WB0030 wash-off adhesive has been approved by bottle deposit systems Returpack in Sweden and Infinit
Fast food chains have revolutionised the way we eat. Order a quick meal, get it packed and finish it off in no time.